 |
Current Project - Sept
2002
Downer Residence, Henderson,
Nevada. Builder Denny Segler
|
The strength
of our wire mesh panels is shown in the above picture. Here the complete roof load trusses,
plywood sheeting, plumbing, etc. are set on our foam panels without
the cement mortar or shotcrete having been applied.
|
Interior
view of foam panels, trusses and windows.
|
|
Shown
here is the plumbing
placed into the foam panel wall system. The copper must be wrapped or protected
from the wire mesh panel, the galvanized wire against the copper won't
work!
|
Here
you can see the electrical boxes held firmly in place with cement,
also you can see the re-bar connecting the panels to the slab. The foam has
been removed from behind the re-bar to allow the shotcrete or the cement
mortar mix behind it.
|
Telephone
(760) 643-2307, Fax (760) 643-2305 or E-Mail
us.
back
to the top
|
|
